Guide chains, accessories, extensive solutions
Special features of guide chains from FLEXATEC

Eight unique and practical features highlight the Flexatec guide chain family.

1. Only 1 (one) ,the chain itself, will  be needed instead of 3 (three)    (connection parts left and right) or sometimes even 5 (five) parts.
2. High stability through the attachment of the latch height
   No uncontrollable movement at the mounting since it is the same as the other links in the chain.
3. By high acceleration values there are no rearing-up of the chain opposite the moveable mounting.
4. Easy mounting. Simply hold chain in place and attach.
5. The chain is at least one link shorter as other chain which has fix-positioned mounting in order to prevent rearing-up of the chain. This is an added advantage in narrow environments .
6. Reduce costs and storage.
7. Right and left compatible.
8. No destructive edges (screws) in area of conductors movement.

Toolless handling

• No tools needed to shorten or lengthen the plastic chains. In cases where tools are needed, tools will be included with shipment (series PT only)
• Opening and closing of plastic guide chains up to 50 mm outer height can also be realized without tools. With larger ones this is possible by simply using a screwdriver.

All guide chains are constructed of materials which achieve maximum durability.

• The bolts are type PU and PC are between 20 and 30 mm thick and are additionally secure with a lock pin
• The impact construction of the guide chains is designed with 4 to 5 positions and therefore are able to withstand enormous dynamic loads in speed acceleration and additional weight. In addition, impacts are inside of chain kink to prevent influence of dirt or other partials from the outside.
  

Copyright © 1997-2002, Cable Protection Systems Inc. All Rights Reserved.
Trademarks used on this site are the property of their respective companies.
Content Developed By:- Stoll Co.
This site was last modified:-Tuesday, July 23, 2002